Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.     

Preparation of highly selective stationary phases for high-performance liquid chromatographic separation of enantiomers by direct copolymerization of monomers with single or twin chiral ligands

Uniformly sized macroporous polymer beads, which can be used as chiral stationary phase (CSP), have been prepared by the staged templated suspension polymerization process using chiral monomer as one of the copolymerization components. This approach enables the preparation of CSPs for which properties such as pore size, pore volume, surface area, chemistry, and chiral ligands can be tuned over a broad range. Several types of well-defined chiral monomers were prepared and allowed to assess synergistic effect of multiple selectors attached to a branched linker as well as the effect of the length and chemistry of the linker. Microscale batch screening was used for simple and rapid evaluation of selectivity. The most promising candidate CSPs were prepared on a larger scale and packed into HPLC columns. Their performance was demonstrated on the separation of racemic N-(3,5-dinitrobenzoyl)-alpha-amino acid alkylamides. The highest separation factors alpha of up to 27 were observed for CSPs prepared from monomers containing the branched spacer. These highly selective CSPs also enabled the separation of larger amounts of the target racemates upon column overload conditions.     

A new capillary electrophoresis end-column amperometric detection system without the need for capillary/electrode alignment

A self-aligning end-column amperometric detection system for capillary electrophoresis was constructed. In this system, the electrode and capillary were exchanged easily and the capillary/electrode alignment procedure is not required. Gold, gold/mercury amalgam, copper and carbon fiber could be used as the working electrode. The principle is in the use of two disk holders with the capillary and the electrode in the center, so that by inserting the disk holders into a groove in the working electrode port, the capillary and the electrode are automatically aligned and the distance between the capillary and the electrode is assured at 0.24 mm. The relative standard deviation obtained using five different gold/mercury amalgam microdisk electrodes for determination of cysteine was 1.5% for the migration time and 3.3% for the electrophoretic peak current. The simple and convenient system was attractive for the routine analysis by capillary electrophoresis with electrochemical detection. The system was applied to the determination of promethazine hydrochloride in human serum.     

Concise synthesis of ether analogues of lysobisphosphatidic acid

We describe a versatile, efficient method for the preparation of ether analogues of (S,S)-lysobisphosphatidic acid (LBPA) and its enantiomer from (S)-solketal. Phosphorylation of a protected sn-2-O-octadecenyl glyceryl ether with 2-cyanoethyl bis-N,N-diisopropylamino phosphine and subsequent deprotection generated the bisether LBPA analogues. By simply changing the sequence of deprotection steps, we obtained the (R,R)- and (S,S)-enantiomers of 2,2'-bisether LBPA. An ELISA assay with anti-LBPA monoclonal antibodies showed that the bisether LBPAs were recognized with the same affinity as the natural 2,2'-bisoleolyl LBPA. [reaction: see text]     

Theoretical studies of dissociative phosphoryl transfer in interconversion of phosphoenolpyruvate to phosphonopyruvate: solvent effects, thio effects, and implications for enzymatic reactions

The conversion of phosphoenolpyruvate (PEP) to phosphonopyruvate (P-pyr) is catalyzed by PEP mutase via a dissociative mechanism. In this work, we investigate the uncatalyzed reaction using ab initio methods, density functional theory, and the semiempirical MNDO/d method. Comparisons of geometries and relative energies of stationary points (minima and transition states) with density functional results indicate that the semiempirical method is reasonably accurate. Solvent effects are examined using implicit solvent models, including the recently extended smooth conductor-like screening model. Due to the large negative charge carried by the system, solvation is found to drastically alter the location and energy of stationary points along the dissociative reaction pathways. The influence of substituting a nonbridging phosphoryl oxygen by sulfur (thio effects) was also investigated. Implications of these results for the enzymatic reaction are discussed.     

Effect of the homogeneity of the column set on the performance of a simulated moving bed unit. I. Theory

Although it is impossible to manufacture identical columns for use in a simulated moving bed (SMB) process, theoretical studies assume that all the columns in an SMB unit have identical characteristics. In practice, calculations in modeling and optimization studies are made with the average values of each column parameter set. In this report, the effects on SMB process performance caused by column-to-column fluctuations of the parameters are discussed. As a first step, we show how the differences in porosity of the columns may be taken into account with a revised set of separation conditions. Reductions in the purity of the extract and the raffinate streams are quantitatively related to the column-to-column fluctuations of the retention times of the two components arising from these porosity differences. For the sake of simplicity, the discussion first addresses the case of a four-column SMB operating under linear conditions. Then, the scope is extended to the cases of SMB units incorporating several columns in each section and to SMB units operating under nonlinear conditions.     

Heat shock protein 27 interacts with vimentin and prevents insolubilization of vimentin subunits induced by cadmium

Vimentin is an intermediate filament that regulates cell attachment and subcellular organization. In this study, vimentin filaments were morphologically altered, and its soluble subunits were rapidly reduced via cadmium chloride treatment. Cadmium chloride stimulated three major mitogen-activated protein kinases (MAPKs): extracellular signal-regulated kinase (ERK), c-Jun N-terminal kinase (JNK), and p38, and led apoptotic pathway via caspase-9 and caspase-3 activations. In order to determine whether MAPKs were involved in this cadmium-induced soluble vimentin disappearance, we applied MAPK-specific inhibitors (PD98059, SP600125, SB203580). These inhibitors did not abolish the cadmium-induced soluble vimentin disappearance. Caspase and proteosome degradation pathway were also not involved in soluble vimentin disappearance. When we observed vimentin levels in soluble and insoluble fractions, soluble vimentin subunits shifted to an insoluble fraction. As we discovered that heat-shock protein 27 (HSP27) was colocalized and physically associated with vimentin in unstressed cells, the roles of HSP27 with regard to vimentin were assessed. HSP27-overexpressing cells prevented morphological alterations of the vimentin filaments, as well as reductions of soluble vimentin, in the cadmium-treated cells. Moreover, HSP27 antisense oligonucleotide augmented these cadmium-induced changes in vimentin. These findings indicate that HSP27 prevents disruption of the vimentin intermediate filament networks and soluble vimentin disappearance, by virtue of its physical interaction with vimentin in cadmium-treated SK-N-SH cells.     

Baker''''s yeast mediated reduction of substituted acenaphthenequinones: Regio-and enantioselective preparation of mono-hydroxyacenaphthenones

Baker's yeast mediated reduction of acenaphthenequinone within 4-10 h afforded mono-hydroxyacenaphthenone mainly with low enantioselectivity, the substrate and mono-hydroxyacenaphthenone product almost converted to dihydroxyacenaphthene after 48 h. By control of the reaction time and in the presence of DMF as co-solvent, the reduction of 6-substituted acenaphthenequinones under vigorous agitation afforded the corresponding 2-hydroxyacenaphthenones in 24-84% yields with 10-93% ee.     

Preparation and Characterization of Nano-ZnFe2O4/TiO2 Films

The nano-ZnFe2O4/TiO2 films possess the functions of desulfurization and degradation for organic pollutants. The sols of ZnFe2O4/TiO2 were prepared by sol-gel method and coated on glass and porous ceramic by vertical coating and dipping-lift processes, respectively, and the samples were obtained after drying and sintering. The composition, appearance, absorption spectrum of the films, and the influence of the film on porous ceramic performances were analyzed using SEM, AFM, UV-Vis spectrometer, and mercury porosimeter, respectively, to determine the operation parameters of the multifunction porous ceramic elements for gas-purification.     

Capillary electrophoresis with end-column amperometric detection of urinary 8-hydroxy-2'-deoxyguanosine

Urinary 8-hydroxy-2'-deoxyguanosine (8OHdG) is an excellent marker of oxidative DNA damage. Until now, urinary 8OHdG has been measured by high-performance liquid chromatography with electrochemical detection. A simple and sensitive method for the analysis of urinary 8OHdG by capillary electrophoresis with end-column amperometric detection has been developed in our laboratory. A single-step solid-phase extraction procedure was optimized and used for extracting 8OHdG from human urine. To improve the sensitivity of this method, a new focusing technique based on a dynamic pH junction was used. The limit of detection was 20 nM (signal-to-noise ratio S/N = 3), the linear range was 50 nM-10 microM, and the correlation coefficient was better than 0.999. The relative standard deviation (RSD) was found to be 0.57% for migration time, and 4.79% for peak current. To show the usefulness of the method, the urinary concentration of 8OHdG in nine healthy persons and ten cancer patients was determined. The urinary concentration of 8OHdG in cancer patients was significantly higher than that in healthy persons.